Masana Energy Solutions HSS Customer Guide

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 150 to 750°C (302 to 1382°F) Physical state Melting point/freezing point Initial boiling point and boiling range Vapour pressure Relative density Vapour density Liquid. <30°C (<86°F) 0.8 to 1.3 >0.9 [Air = 1] <0.13 kPa (<1 mm Hg) [20°C (68°F)] 0.063 to 0.86 kPa (0.4725 to 6.4575 mm Hg) [150°C (302°F)] Oily. Odour pH Dark Brown. / Black. Colour Evaporation rate Not relevant/applicable due to nature of the product. Based on: low volatility Auto-ignition temperature Flash point 250 to 537°C (482 to 998.6°F) Closed cup: >60°C (>140°F) [Pensky-Martens.] Lower: 0.5% Upper: 5% Not considered explosive based on structural and oxygen balance considerations. Substance is a hydrocarbon UVCB. Standard tests for this endpoint are intended for single substances and are not appropriate for this complex substance. Not applicable. Based on: Solubility in Water (insoluble in water.) Viscosity Kinematic: >20.5 mm 2 /s (>20.5 cSt) at 40°C Kinematic: at 50°C: Refer to standard: ISO 8217 Not relevant/applicable due to nature of the product. Based on: low volatility Odour threshold Partition coefficient: n-octanol/ water Upper/lower flammability or explosive limits Explosive properties Not considered oxidizing based on structural considerations. Oxidising properties 9.1 Information on basic physical and chemical properties Appearance 9.2 Other information Decomposition temperature Not observed to decompose by final boiling point:>750°C (>1382°F) SECTION 9: Physical and chemical properties Flammability (solid, gas) Not applicable. Based on physical state. No additional information. Pour point Refer to standard: ISO 8217 Density 840 to 1200 kg/m³ (0.84 to 1.2 g/cm³) at 15°C Solubility(ies) insoluble in water. 10.6 Hazardous decomposition products 10.4 Conditions to avoid Avoid all possible sources of ignition (spark or flame). Avoid excessive heat. Under normal conditions of storage and use, hazardous decomposition products should not be produced. The product is stable. 10.2 Chemical stability 10.5 Incompatible materials 10.3 Possibility of hazardous reactions Under normal conditions of storage and use, hazardous reactions will not occur. Under normal conditions of storage and use, hazardous polymerisation will not occur. SECTION 10: Stability and reactivity 10.1 Reactivity No specific test data available for this product. Refer to Conditions to avoid and Incompatible materials for additional information. Reactive or incompatible with the following materials: oxidising materials. Product name Version 12 Fuel Oil, residual Page: 10/38 STI2299 Product code Date of issue 23 March 2021 Format United Kingdom (UK) Language ENGLISH (United Kingdom) Date of previous issue 2 November 2020.